The newer light sources can last up to 100,000 hours, demonstrating the best efficiency of light energy generation among all available lamps.
What are LED and energy saving lamps
It is necessary to give a clear definition of the lamp on LEDs. This solid-body source of lighting has a working principle based on the production of light radiation as a result of the passage of electricity through a special zone with semiconductors. That is, LEDs are a kind of semiconductors, working within the framework of the formation of light flow. The principle of action of these light sources has serious differences from other variants of lamps.
Speaking of energy-efficient products, we can say that they are able to provide maximum light output, using the minimum voltage. These lamps can be called low-voltage, and the principle of operation is similar to fluorescent linear modifications, fluorescent, light sources using halogen or LEDs.
It is safe to say that energy-saving lamps can have different shapes that differ from each other. This name was given to lamps for the consumption of a minimum amount of electricity and increased operating period, compared to classic bulbs. Even fluorescent-type products can be called energy-saving.
The main differences between energy-saving and LED sources
To understand the differences between these types of light sources, it is necessary to take a closer look at the properties of the brightness of radiation, measured in lumens and characterizing the performance of such products.
To compare light sources, let’s start with a traditional 100W bulb, whose brightness reaches 1700 lm. With a low-voltage LED lamp at 13 W, this indicator will be 1000 lm, and an energy-efficient fluorescent lamp at 13 W – 800 lm. Based on these data, it can be concluded that the same wattage allows the LED source to provide greater illumination brightness. The voltage of the bulb assumes the total energy consumption, that is, the indicators of economy are relevant for all variants of lamps, but energy-efficient products will be less bright.
It is necessary to compare and heat output of lamps, which affects the safety of furniture and appliances, as well as the acquisition of a comfortable temperature in the room. The lowest heating temperature belongs to the lamps on LEDs – the product at 13 W has a heat output of 30.5 ºC, and the energy-efficient lamp with the same voltage heat output will be 81.7 ºC. They are all significantly superior to the classic bulb, demonstrating twice the heat dissipation, but it is clear that LED light sources and here have the greatest appeal.
The final parameter – the duration of use of the lamp. It’s no secret that energy-saving light sources are able to work up to 8000 hours, but LED lamps have brought this indicator to a completely different level – 50000 hours. Ordinary light sources in the calculation and do not go at all, with their 750 hours of work. In addition, energy-saving products fade over time, their brightness drops, and LEDs continue to work with the original properties until the end of its operational life.
The benefits of using LED lamps
Conclusions based on all of the above will be unambiguous – LED lamps are characterized by the greatest benefit for use. They demonstrate the highest quality of energy conservation with minimal electricity consumption, and are able to last much longer than other types of lamps.
Energy saving lamps are also in high demand, due to the quality color flow that is incredibly comfortable to the eye and the electricity saving feature. LED and energy-saving light sources are very similar, and the cost is not too different. In addition, the lamps are interchangeable, because the manufacturers have achieved compliance with the lampholders of lamps and the base of each modern light source.
LED products have a non-traditional shape of the lamp, which increases the cost of production. Engineers and technologists from around the world are working to improve the manufacturing technology of LED light sources, the cost of production is regularly reduced, so you can predict a fairly rapid replacement of every lamp for LED versions, and this will happen in every home.
